Carbon dioxide injection pump Carbon dioxide injection pump

Carbon dioxide injection pump

Supercritical CO₂ (carbon dioxide )pumps
Pumping high density liquid CO₂ requires supercritical CO₂ pumps. Supercritical fluids are very dense with superior properties comparing with liquids or solvents. The most commonly used of these fluids is CO₂. Unlike solvents, it has a much less impact on the environment.

Pressure and temperature are important two factors in controlling density during extractions.
Density and Flow also vital during CO2 injection process. How to supply CO2 to an extraction system is an issue for most industries. The common method is to adopt liquid CO2 from a cylinder using a compression pump like carbon dioxide pump with 50mpa.

CO₂ injection pump called carbon dioxide CO2 supercritical extraction pump it make full use of phase CO2 boosting pump combing with injection pump maximize the output pressure up to 1500 bar . With USA GE parts and technology, compact structure, low noise with lower spare parts. The whole phase has no emission, easy to operate with little maintenance, to get a dependable feature. It is widely used in oilfield to get oil through CO2 injection. Supercritical carbon dioxide extraction, supercritical CO2 fluid cycle heat exchange in line with the national carbon peak, carbon neutral and carbon sequestration policy.

Main parts of the CO2 injection pump include motor, pump liquid body with super seals kits and Swiss made metal material to avoid fatigue crack. Crankshaft made by 42CrMo with forge through quenched and nitride. With high strength and high hardness. Wear-resistant and durable; plunger made by tungsten carbide alloy wear-resistant. Main seal kits imported DuPont aramid fiber.

To generate and supply liquid carbon dioxide, high pressure is necessary for generating and supplying enough liquid dioxide to push the oil to raise them to the drilling hole. Specifically developed and designed supercritical CO2 injection pumps with Watex and international Zone Ⅱ and Atex standard. It is widely used by some clients from Middles east and South Africa .

Requirements for high pressure supercritical pump of CO₂ ( Carbon dioxide)extraction


The extraction of liquid carbon dioxide under high pressure there is high standard on the pump technology. Fluid end of the pump and related parts and seals are optimized for extraction. Most of them only can be purchased from worldwide famous brands.

Flexible plunger coupling will keep the alignment between liquid and power end in a reasonable range. Stuffing box adopts flushing and super smooth surface and ports to remove debris, to maximize the lubricate system for the internal plunger to get the optimal cooling system through the oil chiller .

Carbon dioxide extraction and purification require special CO2 supercritical pump that can handle the properties of the liquid and gas. Watex is the reasonable partner to supply the professional solution and scheme to meet different client requirements. We has many year experiences and know-how in this field. Such special designed supercritical pump supplies the many CO2 applications of the chemical industry as well as the pharmaceutical or food industry.

Knowledge of Supercritical CO₂ ( carbon dioxide )extraction pump system

In response to the burgeoning market, demand for environmentally extraction processes for a wide range of natural oil or petrochemical industry acccording to the market special requirement. We have developed the qualified supercritical CO₂ extraction pump system for different industries with related high pressure and flow rate including the unit. This type of pump features specifically for CO₂ circulation and recover 100% of the CO₂ vapor.

Pressure and temperature are important two factors in controlling density during extractions.
Density and Flow also vital during CO2 injection process. How to supply CO2 to an extraction system is an issue for most industries. The common method is to adopt liquid CO2 from a cylinder using a compression pump like carbon dioxide pump with 50mpa.

Supercritical or liquid carbon dioxide can be used as a solvent in various applications. CO2 extraction can be used in the chemical industry and the pharmaceutical and food industry as well. Carbon dioxide injection pump can be used in chemical and cosmetic industries as well as in the food. Beverage and pharmaceutical industries. Common applications are extraction or purification processes. CO2 acts as a supercritical solvent for lots of industries. For our industry , oil industry need a represent resistant pump which accelerate the output of the crude oil at different layers of ground that other tools or technology can not instead .

The features of supercritical CO₂ extraction ( injection pump)

Supercritical CO₂ (carbon dioxide )pumps
Pumping high density liquid CO₂ requires supercritical CO₂ pumps. Supercritical fluids are very dense with superior properties comparing with liquids or solvents. The most commonly used of these fluids is CO₂. Unlike solvents, it has a much less impact on the environment.

Our supercritical CO2 pump and unit configurated with air compressor and explosion-proof motor rated for C1D1 areas. Whole of the CO2 injection pump and system is designed to process liquid condensation without damage to pull oil back through the pump when evacuating a system.

  • Explosion proof motor rated for C1D1 areas
  • Control system drives the pump to a stable pressure and flow
  • Continuous 100% duty cycle working 24 hours without stop
  • No extra air compressor needed during working
  • Avoid valve to stop full load and pressure
  • No contamination of the pump ,main parts made by 316L or hard alloy
  • Flow rate is adjustable according to the C02 requirement
  • No lubrication in the fluid end to maximize the span-life of whole system
  • Supercritical fluid extraction (SFE)
  • Supercritical fluid chromatography (SFC)
  • Cleaning as a solvent substitute
  • Replacing solvents in chemical processes.

Why supercritical CO₂ ( carbon dioxide )injection pump so effective?

Once it reaches some extend temperature, CO₂ keeps a gas-like fluid, combining the solvating power of a liquid with the diffusion properties of a gas. Just using small amounts of fluids can improve its solvating properties.

What pressure and temperature should be controlled for oil pushing through CO₂ injection pump .
Supercritical CO₂ pump should keep stable pressure and temperature and deliver a consistent CO₂ continuously. There are two parts are necessary.

Pressure control valve, pressure control is one of the important parts in supercritical CO2 extraction. Fluctuation through the T-valve can result in density changing and affect solubility during extraction.

Thermal control is important system for the supercritical CO2 pump
It is important to control heating and cooling for supercritical CO2 applications and this involves accurate thermal regulation valves and process.

The best way to manager the density through a flow meter, to monitor incoming CO2 densities in real time. This allows for flexibility in controlling the speed of the pump result in change different density of the CO₂.

Supercritical CO2 pump can perform changing specifications and producing consistent pressure and density. Supercritical fluid technologies adopts a self-contained liquid carbon dioxide (CO2) pump for use in supercritical fluid extraction.

High pressure pump carbon dioxide ( CO₂ )injection for supercritical extraction

Supercritical fluid extraction is process that play important role from liquid to gas using supercritical fluid as the extracting solvent. Supercritical CO2 is an excellent solvent. It has become popular solvent due to non-flammable, non-toxic. It can be mixable with organic solvents, recoverable after processing, Diffuse faster than conventional fluid solvents.
More applications with liquid CO2 as extracting solvents.

  • Extraction of crude oils and resins from natural Botanicals
  • Extraction of medical herbs
  • Extraction of antioxidants
  • Extraction of pesticide residues or toxic materials from food ingredients.
  • Removal of solvent residues from active pharma ingredients
  • Micro and nano particle formation
  • Hydrogenation under supercritical CO2 environment
  • Catalyst Regeneration Using Supercritical CO2

The principle of CO2 injection process consists of circulating supercritical CO2. Through the high pressure pump then depressurize the mixture to recover the extract. Indeed, after depressurization the CO2 is released in gaseous form will lose its solvent property leading to condensation of the extract into liquid or solid form.

In a supercritical area, the CO2 can be pumped like a liquid. This means that supercritical CO2 pump sweeps through the reservoir to push the oil to the riser. It is more effective than water, making a advanced technology for a more efficient process to increase crude oil rate.

错误: Content is protected !!