Ultra high pressure water jet cleaning machine water blaster equipment

Publish Time:2018-05-26 00:00:00
Hydroblasting machine, water jetting or water blasting machine are terms commonly used when describing water as the tool to do surface preparation. The use of water is a technique for cleaning surfaces, which relies solely on the energy and force of water striking a surface to acheive its cleaning effect. In principel abrasive is not used in waterblasting systems, hence, the problems caused by dust pollution .
Surface condition after ultra high water blasting
Flash rust :
When large areas are waterblasted, flash rusting which deminish the original surface standard may occur, previous painting can be carried out. The degree of flash rusting depends on many factors, such as humidity level, temperature and the length of time the surface is exposed.

Degrees of flash rust :
Light flash rust : small quantities of light tan-brown rust will partially discolour the original steel surface. The discolouration may be evenly distributed, or in patches, but it will not be heavy enough to mark an object brushed against the areas.
Medium flash rust : a layer of light tan-brown rust will cover the original steel surface. This layer may be evenly distributed or in patches, but it will be heavy enough to easily mark objects brushed against the areas.
Heavy flash rust : a heavy layer of dark tan-brown rust will be completely covering the original surface. This layer will be evenly distributed and will easily mark objects brushed against the areas.
Temperature rise :
The use of hydroblaster pressure washer will cause the temperature of the steel to rise. The increase of temperature of the steel surface can be substantial, depending on the pressure of the equipment used and will help waterblasted surfaces to dry off faster, hence reducing the degree of flash rusting.
Removal of foreign elements :
The use of water has the advantage of removing oil and grease from the surface along with salt deposits. This is a major plus point of hydroblasterpressure washer. The grey, brown to black discoloration of corroded and pitted steel after waterblasting cannot be removed by further blasting. Studies shows that this thin film consists of mainly ferric oxide, which is an inert material. As it is tightly adherent, it does not present a serious contamination problem.
Surface profile
Hydroblaster pressure machine will not produce a surface profile as such. Weakend steel might erode, resulting in metal loss, but the surface profile exposed after blasting will have been produced by earlier surface preparation or corrosion.

    Send us a message

    About company

    Watex is unswervingly based on technological innovation and committed to the high pressure water technology with our strive .

    ----Jerry Ling ,CEO

    Sed ut perspiciatis unde omnis iste natus error sit voluptatem accus.
    About 15 minutes ago
    Keep Connected

    Like us on Facebook

    Follow us on Twitter

    Add us on Google Plus

    Add us on Youtube

    Contact Information
    Jiangning Economic&development zone 66 Nanjing
    Copyright 2019 by Watex Machine
    Translate »