Why water blaster?
Water blaster is a method by which a high pressure stream of water from 600bar to 2800bar used to remove old paint, rust, rubber, chemicals, or other heavy build up without causing damage to the surface below it. This method is perfect for internal and external surfaces because the spray gun operator is able to access those "hard to reach" areas .Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned. One of the major differences between water blasting and other cleaning abrasives is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning. Extremely high pressure systems 2800bar are used for concrete cutting.
S100 can be easily installed in unit with a small base frame. With operating pressures of up to 1000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning. The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air. As an option, pumps of the S100 are fitted with suction valve lifts. This elegant alternative to a bypass valve allows the water to circulate when no pressure in the pump head and the water tool is not actuated. Additionally, all Watex pumps are certified according to Atex
M150 plunger unit max pressure up to 1500 bar and flow rates of up to 350L/min, these plunger pumps are the ideal manual tool for industrial cleaning tasks such as paint stripping and descaling. The plunger guide guarantees a long service life for the high pressure seal. The sealing water system used prevents leakage, enables an especially high durability of the high pressure seals and counteracts the ingress of air. With the built-in central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. Carbide plungers are used in pumps with an operation pressure over 1500 bar, which are particularly robust and give a long life resulting in low maintenance costs. The gearboxes of Watex pumps have an integral oil cooling system. Additionally, all Watex pumps are certified according to Atex (ExII2G
H300 series plunger pump provide the highest pressure level in the Watex pump series. The H300 pumps are ideally suited for tasks such as cutting, dismantling, decoating and derusting. With the built-in central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. The carbide plungers used are extremely robust, provide long service life at very high pressures of up to 3000 bar, and can therefore guarantee low maintenance costs. They are also insensitive to instantaneous changes in temperature. The plunger guide ensures a long service life for the seal system. The sealing water system used prevents leakage, enables a higher durability for the high-pressure seals and counteracts the ingress of air. All gearboxes of Watex pumps have an integral oil cooling system. Additionally, all Watex pumps are certified according to Atex (ExII2GDT5).
The ultra high-pressure pumps of the H400 offer the highest pressure level of the Watex pump series. This makes the pumps of the H400 series ideal for application in the cutting area Built in centric valve design, these plunger pumps have high volumetric efficiencies even at very high pressures. The hard carbide plungers and plunger guidance used are extremely stable to ensure a long service life and thus low maintenance costs at very high pressures up to 4,000 bar. Furthermore, they are insensitive to thermal shocks. The sealing water system prevents leakage, ensure higher durability of the high-pressure seals and counteracts the intrusion of air.
S60 is a small size and low weight make them suitable for use in high-pressure units system .With its operating pressures of up to 600 bar, it is outstandingly suited for many different cleaning tasks, e.g. in the chemical industry, oil and gas industries, as well as for marine applications. It is also possible to fit the pump with a suction valve lift for unpressurised circulation of the water within the pump head. With a required driving power of 30 kW, it is capable of pumping up to 35L/min at 600 bar, yet still offers favorable purchase and operating costs.